With its dynamic handling and powerful boxer engine with BMW ShiftCam technology, the BMW R1250 R means unparalleled versatility. Learn everything you need to know about this bike’s technical data and standard equipment here.
Technical data
Engine
Rated output
100 kW (136 hp) at 7,750 rpm
Emission control
Closed-loop 3-way catalytic converter
Type
Two-cylinder, air/liquid-cooled, four-stroke boxer engine with two overhead spur-gear driven camshafts, one counterbalance shaft and BMW ShiftCam variable intake camshaft control
Bore x stroke
102.5 mm x 76 mm
Capacity
1,254 cc
Max. torque
105.5 lbs-ft at 6,250 rpm
Compression ratio
12.5 : 1
Mixture control
Electronic intake pipe injection / digital engine management system: BMS-O with throttle-by-wire
Exhaust emission standards
EU 5+
Performance / fuel consumption
Fuel consumption per 100 km based on WMTC
4.75 l
Fuel type
Super unleaded (max. 15% ethanol, E15), 95 ROZ/RON, 90 AKI
CO2 emission based on WMTC
110 g/km
Electrical system
Alternator
Permanent magnet alternator with 508 W (nominal power)
Battery
12 V / 12 Ah, maintenance-free
Power transmission
Clutch
Multiplate clutch in oil bath, anti-hopping clutch
Gearbox
Claw-shifted 6-speed gearbox with helical gears
Drive
Cardan
Chassis / brakes
Frame
Steel tube frame with load-bearing engine, steel tube sub-frame
Front wheel location / suspension
Upside-down telescopic fork
Rear wheel location / suspension
Cast aluminum single-sided swingarm with BMW Motorrad Paralever, WAD shock absorber, spring preload continuously adjustable hydraulically by handwheel, rebound damping adjustable by handwheel
